Skip to main content
- MON - FRI: 7:00am - 4:00pm (CST)
- 1.800.776.7192
Agricultural Products
Drift Retardant and Deposition Aid
Breeze Ease is the perfect solution for aiding coverage as well as drift control while applying pesticides and other additives. It’s super-concentrated and mixes well to assure sufficient distribution of the polymer throughout the pesticide solution. Just a few ounces mixes with 100+ gallons of water for superior performance.
Great For Use In:
- Dessicants
- Cotton Defoliants
- Water Soluble Pesticides
- Wettable Powder Pesticides
AR-CHEM AG SPECTRA-BLUE [Marking Concentrate]
High Visibility Agricultural Marking Concentrate
AR-CHEM AG SPECTRA-BLUE is designed to make your foam marker stand out. Foam suddenly becomes vibrant enough to be seen in low light. This is especially advantageous for the equipment operator who must spray fields at pre-dawn or early twilight when ambient light conditions are not at their best.
Features:
- Will not stain application equipment, tanks, lines or other items it may contact.
- For best results, use with any of Share Corporation’s foam marking concentrates.
- Does not leave behind residues which could affect soil or plants.
- Increases reflectivity of foam markers under equipment headlight beams.
AR-CHEM AG SLICK SHOT [Prohibits Residue Adhesion]
Prevent agricultural spray products from sticking to equipment surfaces with AR-CHEM AG SLICK SHOT. AR-CHEM AG SLICK SHOT can be applied onto metal surfaces, storage tanks and floaters. A thin layer of this product provides a siliconized coating which repels any liquid sprays from adhering to treated surfaces. Herbicides, pesticides, fertilizers and adjuvants will not cling to storage tanks. Plus, AR-CHEM AG SLICK SHOT acts as a protective finish, leaving metal parts and surfaces looking shiny new. Simple to use, AR-CHEM AG SLICK SHOT is simply the best protection for your agricultural equipment.
Features:
- Coats equipment with non-stick, protective coating to prevent unwanted deposits from adhering.
- Easily applied by spraying, rolling, or brushing onto surfaces.
- Also provides a high gloss protective and decorative shine to metal surfaces.
- Keeps herbicides, fertilizers, pesticides from clinging to storage tanks.
Ar-Chem Ag Hot Pink Foam Marker Dye
Concentrated Foam Marker Dye
AR-CHEM AG HOT PINK FOAM MARKER DYE is designed to make foam marking agents such as AR-CHEM AG AGRI-BEST FOAM MARKER or other similar products and foam suddenly become
vibrant enough to be seen in low light. This is especially advantageous for the equipment operator who must spray fields at pre-dawn or early twilight when ambient light conditions are not at their best. AR-CHEM AG HOT PINK FOAM MARKER DYE also increases the reflectivity of foam markers under equipment headlight beams. When you want to see a noticeable difference in your foam marker, use AR-CHEM AG HOT PINK FOAM MARKER DYE.
Features:
- Will not stain application equipment, tanks, lines or other items it may contact.
- For best results, use with any of Share Corporation's foam marking concentrates.
- Does not leave behind residues which could affect soil or plants.
- Increases reflectivity of foam markers under equipment headlight beams.
Ar-Chem Ag Foam Tank Anti-Freeze
Foam Tank Anti-Freeze Concentrate
Don’t let low temperatures freeze-up your plans for spraying crops. Add AR-CHEM AG FOAM TANK ANTI-FREEZE to liquid foam solutions and you can mark rows even in temperatures below 32°F. Made with a select blend of ingredients, AR-CHEM AG FOAM TANK ANTI-FREEZE lowers the freezing point of foam marking solutions. It also inhibits condensation from forming in tanks thus preventing any possibility of water freezing in tanks. Best of all, AR-CHEM AG FOAM TANK ANTI-FREEZE will not affect the performance or properties of marking foams. When spraying crops in colder conditions, make sure your marking foam won’t freeze-up on you. Add AR-CHEM AG FOAM TANK ANTI-FREEZE to your tanks.
Features:
- Concentrated form provides economical use rates of up to 1 gallon per 80 gallons of foam solution.
- Compatible with AR-CHEM AG AGRI-BEST FOAM MARKER as well as with other commonly used agricultural foam marking concentrates.
- Methanol based formulation is more efficient than other alcohol formulations.
- Protects in sub-freezing temperatures, to approximately 0 degrees.
AR-CHEM AG CHEM TITAN [Pesticide Tank Cleaner & Neutralizer]
When spraying your fields for weeds and insects, you can’t simply start randomly mixing herbicides and insecticides in your tank. Certain chemical combinations may counter the effectiveness of the pesticides you’re using, or you may create a deadly poison that might kill your crop. Even a tank which contains only small traces of a previously used pesticide may contaminate any subsequent pesticides you use on your crops. To thoroughly and completely clean your tank, use CHEM TITAN from Ar-Chem Ag. Alkaline solvent lifts off pesticide residue in tanks.
Features:
- Mixes with hard water to emulsify and disperse chemical products
- Eliminates cross contamination in tanks
- Environmentally friendly formula is non-flammable, water soluble, and biodegradable.
- Non-corrosive formulation is safe for use on metal and painted surfaces.
- Effectively removes field debris, fertilizer, pesticide, and spray adjuvant residues from tanks.
- Safe for use on floater equipment and spray booms.
AR-CHEM AG BUBBLE BUSTER [Concentrated Defoamer]
Eliminate foam in spray tanks with AR-CHEM AG BUBBLE BUSTER. As floaters and other application equipment travel up and down fields, adjuvants, surfactants, pesticides and fertilizers tend to slosh around in holding tanks. This constant shifting and jostling generates foam which can cause a variety of problems. Spray patterns may apply products unevenly, mechanical calibrations can be affected and foam may actually improperly change the dilution rate of solutions in the tank. By first adding Ar-Chem Ag’s BUBBLE BUSTER to tanks, subsequent products added into the tank will no longer create foam. Even in tanks where foam has
already developed, adding BUBBLE BUSTER to solutions will knock down any existing bubbles.
Features:
- Can be added prior to the introduction of agricultural chemicals to prevent foam formations from occurring.
- Can be used to provide immediate knock down of existing foam formations.
- As little as 1 to 2 ounces will control foam in 100 gallons of spray solution.
Ar-Chem Ag Agri-Best Foam Marker
Avoid missing areas or overlapping when applying pesticides, herbicides and fertilizers in your fields. AR-CHEM AG AGRI BEST FOAM MARKER has the ability to remain intact in extreme heat, intense sunlight, and dry soil make it one of the premium agricultural products available. This specially formulated concentrate contains built-in water softeners that allow you to use an economical dilution rate with hard water without adding water softening agents.
Features:
- May be used at a dilution rate as high as 120:1, depending on water hardness.
- Compatible with anti-freeze, water softening agents and foam marking dyes.
- Foam remains intact in extreme heat, intense sunlight and dry soil.
- Blue color allows operator to check for proper mixing with simple visual inspection.
© 2024 Share Corporation.
