THE INSPECTOR RECHARGEABLE LED HANDHELD WORKLIGHT

Get a Quote!

• Super bright 370 lumens (low) to 3000 lumens (turbo).
• IPX 4 moisture resistant rated against water sprayed in all directions w/the Type C charging port cover in place.
• Shockproof, dust and water resistant w/Type C charge port cover in place.
• Permanently attached pocket clip that will never pop off.
• The magnetic tail cap allows for a hands-free work and inspection application when around ferrous metals.
• Attached safety wrist lanyard provides safety and drop prevention.
• Anti-roll bezel prevents rolling on non-level surfaces.
• Adjustable bezel allows crystal clear focusing.
• Serrated bezel allows heat to dissipate when left on and placed face down on a flat surface, and also recognizes that the light has been left on.
• The battery level indicator is the on/off button (green indicates fully charged, red indicates reduced battery energy level).
• When charging, the red light on the on/off button will appear, then turns green when fully charged.
• Equipped with a 2200mah, 18650 rechargeable battery and charging cord.
• On/off switch operation.
• High/Low/Flash/Off.
• Double-press for turbo mode.
• Long press for stepless High/Low illumination.
• Rust-proof anodized aluminum alloy body.
• Lightweight, only 7.005 ounces with the battery.

Product Category: 
Tools
Product Specifications: 
PDF icon SHARE TECH THE INSPECTOR WORKLIGHT FLYER 005 sm.pdf
0
0
0
Share This Product: 

EXTENDABLE LINE-UP PRY BAR

Get a Quote!

•    Heavy-duty chrome vanadium steel hex bar and pipe construction.
•    High gloss manganese phosphate finish.
•    Cross-checked handles for a slip-proof positive grip.
•    Extendable handle provides enhanced leverage and storage. 
•    Meets ANSI requirements.
•    Meets ASME B107.60-2004.
•    Handle extends in 1/2’’ increments. 
•    Lifetime warranty against factory defects.

Product Category: 
Tools
Product Specifications: 
PDF icon SHARE TECH EXTENDABLE LINE-UP PRY BAR FLYER 004 sm.pdf
0
0
0
Share This Product: 

SINGLE KNUCKLE EXTENDABLE PRY BAR

Get a Quote!

•    Heavy-duty chrome vanadium steel hex bar and pipe construction.
•    High gloss manganese phosphate finish.
•    Cross-checked handles for a slip-proof positive grip.
•    Extendable handle and indexable head provide enhanced leverage and storage. 
•    Meets ANSI requirements.
•    Meets ASME B107.60-2004.
•    Handle extends in 1/2’’ increments. 
•    Foot indexes 240° in 20° increments. 
•    Lifetime warranty against factory defects.

Product Category: 
Tools
Product Specifications: 
PDF icon SHARE TECH SINGLE KNUCKLE PRY BAR FLYER 003 sm.pdf
0
0
0
Share This Product: 

SMOOTH OPERATOR HAND HELD RATCHETS

Get a Quote!

•    A hand ratchet that flows freely in your hand while performing the “task at hand”.
•    Custom tapered handles with elevated center ridge lines allow for the perfect grip and anti-slip protection.
•    A “smooth” 72-tooth gear design in the ratcher head provides for  “smooth“ travel and a 5-degree sweep in tight working environments.
•    Reduced head design allows for use in tight, confined spaces.
•    Heavy-duty one-piece solid bar, chrome vanadium construction with a brushed finish for easy cleaning.
•    The open hole design at the end of the ratchet handle allows for a wrist lanyard to be used in overhead or over water areas, wherever the fear of dropping the ratchet is of concern, and also for hanging on pegboards.
•    The push key quick-release design on the ratchet head allows for a quick, easy transaction with sockets and extensions.
•    A ratchet that is needed in all shops and crafts.
•    Meets ANSI/ASME B107. 10M-1996
•    Available in 1/4”, 3/8” and 1/2” drives.

Product Category: 
Tools
Product Specifications: 
PDF icon SHARE TECH SMOOTH OPERATOR HAND HELD RATCHETS FLYER 002 sm.pdf
0
0
0
Share This Product: 

INEX DOUBLE KNUCKLE DUAL PURPOSE INDEXABLE/EXTENDABLE LENGTH INDUSTRIAL/AUTOMOTIVE PRY BAY SYSTEM

Get a Quote!

• Heavy duty chrome vanadium steel hex bar and pipe construction.
• High gloss manganese phosphate finish.
• Cross checked handles for a slip-proof positive grip.
• Extendable handle andindexable head provides enhanced leverage and storage. 
• Meets ANSI requirements.
• Meets ASME B107.60-2004.
• Handle extends in 1/2’’ increments. 
• Foot and upper knuckle index 195° in 15° increments. 
• Lifetime warranty against factory defects.

Product Category: 
Tools
Product Specifications: 
PDF icon SHARE TECH PRY BAR FLYER 001 sm.pdf
0
0
0
Share This Product: 

Carbide Step Drill

Get a Quote!

Characteristics:

  • Quick change system easily locks and unlocks cutter from shank.
  • Safe and easy drilling with rotary mode only.
  • Carbide provides more than 5 times the life of high speed steel.
  • Special design ensures round burr-free holes.
  • Incorporates a quick-change system for replacing cutters.

 

For use in:

  • Sheet metal, Stainless, Copper, Aluminum, up to 9/64" - 10GA.

 

Specifications:

  • Drilling depth: 9/64" (3.5mm)
  • Shank dia: Poly-clic shank "S"; 20mm (25/32") - 48mm (1 7/8)
Product Category: 
Tools
Share This Product: 

Poly-Clic Drimond Core Bit

Get a Quote!
  • Dry drilling in pre-cast concrete, concrete, and reinforced concrete (reinforcing bars below 1/2" dia.).
  • The carbide center pin ensures accurate hole starting without bit walk.
  • Peripheral threading on cutter for efficient removal of dust.
  • Heat treated for durability.
  • SDS Plus shank.

 

Applications:

  • All kinds of piping work for water, gas, electricity, air-conditioning and drainage jobs.
  • Drilling in Hume pipes, ceramic pipes, and PVC pipes.

 

Specs:

  • Diameter: 1 inch to 8-1/8 inches.
  • Maximum drilling depth: 6 inches.
  • Use only with rotary mode.
Product Category: 
Tools
Share This Product: 

Aquashot (Diamond Tip)

Get a Quote!

Characteristics:

  • Built-in water tank self feeds water.
  • Quick change body.
  • Replaceable cutter.
  • One shank fits all sizes.

 

For use in:

  • Porcelain
  • Ceramic
  • Granite

 

Specifications:

  • Shank: 1/4" Hex
  • Dia: 5/32" - 3/8"
  • Max Drilling Depth: 1" - 3/8"
  • Optimum RPM: 1000 - 3000 rpm
Product Category: 
Tools
Share This Product: 

Deltagon Bit SDS-MAX/Spline

Get a Quote!
  • Safer against re-bar.
  • Improved drilling speed.
  • Low impact, worker friendly.
  • Drills near-perfect round holes.
  • Easy centering.
  • Minimum wear on outside diameter.
  • Penetrates through deck-plate.
  • For drilling in concrete, block, brick, rock, deck-plate and concrete.
  • For use with Rotary Hammer Drill with SDS-max and spline.
Product Category: 
Tools
Share This Product: 

Deltagon Bit

Solid Carbide Head
Get a Quote!
  • Safer drilling against re-bar.
  • Penetrates through deck-plate.
  • Drills near-perfect round holes.
  • Smooth and easy centering.
  • Longer life.
Product Category: 
Tools
Share This Product: 

Pages

Subscribe to Tools